Skip to main content

Next Build: A Pinguino 145

Well here we go on another Pygmy solo kayak build. This time a Pinguino 145. It's one of Pygmy's most popular boats. It's stable, light, capable of sea touring, and only 14.5'. Here's another nice article about the Pinguino.

The picture below is from the Pygmy website  
(Pygmy Boats owns the copyright to this image and I make no claim to the image. It's here under fair use policy but will be happily removed if Pygmy requests it to be removed).



A friend of ours has wanted me to build one for her for some time and I finally think I can start to work on it. It should be a great boat for her. She's an active woman in her early 70's. The massive stability of the Pinguino, the larger cockpit, the relatively low weight, and being only 14.5' should work well for her.

I'll blog about it here, but I'll also be adding some better pictures to the "Rogue Manual" on how to build one without wires.

This boat will NOT have any wire sewing and will be taped instead. It will NOT have a billion holes all over it. It will look gorgeous!

Just picked up the kit and all of the other bits and such that help you to make one from the Pygmy store in Port Townsend, WA, USA. This weekend is the annual Wooden Boat Festival and it's a great time to visit PT.

That's it for now. But I should be able to start building it within a week or so as soon as I clean out my garage and get the building table set up.

Cheers!




Labels:

Comments

  1. Bruckzone11 September, 2019 12:58

    This comment has been removed by the author.

    ReplyDelete
  2. Bruckzone11 September, 2019 13:04

    Hello and a huge Thank you. I just started my Pinguino 145 and was extremely glad to read all the info you put into the rogue manual. I built a strip canoe years ago but this is my first plywood craft. The Pinguino seemed to be exactly what I wanted. Was very worth it to drive up to Pygmy and test paddle the boats. Thank you for all your work in sharing this valuable resource and I look forward to seeing your Pinguino take shape as I am building mine.

    Regards from Portland

    ReplyDelete
    Replies
    1. Steve11 September, 2019 20:06

      Glad you found my blog! Looks like we'll be building these boats at the same time so feel free to share pictures of your build too.

      Steve

      Delete

Post a Comment

Popular posts from this blog

The Rogue Manual

I've posted about this earlier, but thought it might be good to post it again for anyone who may be interested. I've started to write a manual of tips and tricks for Pygmy solo kayak builders. It covers the taping method, so that your boat doesn't have hundreds of holes all over it. I'm on version 2 now. Version 2 covers several other tips and tricks from myself and from others as collected over time. ATTENTION : Use the manual at your own risk! The only person responsible for any mistakes or problems with the building of your boat is you. Always use the official Pygmy manual that came with your kit. Only do those tips and tricks that make sense to you. If something in the manual doesn't sound right to you, then don't do it! Neither I, nor Pygmy Boats, nor anyone else except YOU is responsible for the safety of your boat and the quality of your build. It's in very rough draft form right now, but if you'd like to read it, please send a $10 donat...
11 comments
Read more

Annapolis Wherry Hull Painted

If you haven't yet, please read my previous post regarding amine blush and primers.  After thoroughly washing the hull with water, and then priming, I was now ready for top coating.  I used Interlux Toplac Plus in Matterhorn White. What a great paint! OMG... this stuff seems to have magical properties! I've never used a paint that does not sag or run, even on vertical hull sides.  Of course, you have to roll on a light coat with a foam roller, but even with a thin coat like that, most paints would still have runs. This one doesn't! And you don't need to tip it either! Just roll it on and walk away.  It gets better too... you don't have to sand after each coat! As long as you roll on a second coat after 16 hours but before 3 days, you don't have to sand. Nice! I did three coats in three days with no sanding between coats. There's a slight bit of orange peel, but most of the surface issues are due to my poor surface prep instead of orange peel. To be honest, ...
Post a Comment
Read more

Grain Surfboards Waterlog Surfboard Build! Part 1

I'm making a surfboard!  No, I don't actually surf. At least not yet. But we go to Hawaii a lot and a guy has to have a board, right? I didn't kayak either until I built my first Pygmy Coho over 25 years ago. Now I love kayaking. Hopefully the same thing will happen with the surfboard.  The board is a kit from Grain Surfboards . I chose the Waterlog in the 10' version.  I'm super tall and heavy and probably should have selected one of their larger boards, but this is the largest board they have that both Alaska Airlines and Hawaiian Airlines will let my check (They have a 10' 5" limit).  I didn't get any pics of the kit box, but it's just a long (10' plus) cardboard mashup box with sticks in it. The epoxy kit comes separately.  I also bought the "rocker table" that is CNC cut to precisely curve the board as you build it. I highly recommend buying a rocker table if you build one.        The kit comes with white cedar planks that you g...
Post a Comment
Read more