Skip to main content

Pinguino Deck Fiberglassed

Big step tonight... I fiberglassed the deck of the Pinguino 145.

I think it turned out okay. Too many drips to clean up, but it shouldn't be too bad.



A few slits in the cockpit helps the cloth to lay down in the recessed deck area.


Will add a fill coat of epoxy tomorrow and then let it cure for a few days.




Cheers!




Comments

Popular posts from this blog

The Rogue Manual

I've posted about this earlier, but thought it might be good to post it again for anyone who may be interested. I've started to write a manual of tips and tricks for Pygmy solo kayak builders. It covers the taping method, so that your boat doesn't have hundreds of holes all over it. I'm on version 2 now. Version 2 covers several other tips and tricks from myself and from others as collected over time. ATTENTION : Use the manual at your own risk! The only person responsible for any mistakes or problems with the building of your boat is you. Always use the official Pygmy manual that came with your kit. Only do those tips and tricks that make sense to you. If something in the manual doesn't sound right to you, then don't do it! Neither I, nor Pygmy Boats, nor anyone else except YOU is responsible for the safety of your boat and the quality of your build. It's in very rough draft form right now, but if you'd like to read it, please send a $10 donat...

Pinguino End Pours and Other Jobs

I've spent the past day and today doing a number of jobs that just need to be done but aren't that noticeable. First, I added a saturation coat to the bare wood on the #4 panels above where I cut the fiberglass the other day. I also added a layer of epoxy over the area where heels may rest. Today I scraped the sides and heel area and added another coat of epoxy.Here's how it looks now. It's technically a third coat, but really only two as much of the first two have been either scraped or sanded. I may add a third layer once this is cured. I also worked on the end pours. The Pygmy manual says to do the end pours later on after the boat is complete. It says to take the boat outside and prop it up on a wall with the end in a bucket of ice water. Then you contort yourself and pour thickened epoxy down into the end and let it cure. Then you do the other end. THEN... you have to guess where you can drill holes through the ends for your painters (the lines that you t...

The Pygmy Pinguino 145 Kayak is Completed!

Ta Da! I finally finished it. Haven't been able to blog much about it, but here's how it looks... It has four coats of varnish on both the hull and deck. It probably should have had six or more, but I'm tired. I made my own padeyes, and I opted to not install a perimeter line yet. My friend who I built this for is a very casual user and this is probably sufficient for her, but perimeter lines would be a nice safety feature though. That's it! Until next time, I'm signing out for now.... Cheers!